Modular Barracks

Description:

The modular barracks can provide tactical support for military personnel and meet the needs of accommodation and dining under field conditions.

It consists of high pressure inflatable tents, transport containers and supporting facilities and equipment, and is divided into modules such as Command，Dining，Maintenance，Accommodation，Shower，Cleaning，Toilet，Supporting.

 The supporting products of each module of the system can be customized according to demand

 The system uses containers as packaging and transportation

 Transportability

The system meets the restrictions of road, rail, water and air transport

 Concealment and anti-detection capabilities

1） The outer canopy material is opaque and meets the requirements of blackout

2） The outer canopy is made of tarpaulin with camouflage function

3） It is easy to mount the standard camouflage net outside the tent

Quick setup High load bearing   Rain resistance High wind resistance Prolonged pressure holding

Technical Parameters:

Environmental adaptation+

1) Wind resistance: able to withstand strong winds with a wind speed of > 28.4 m/s (level 10)

2) Temperature resistance: working temperature:4-43°℃~+50°℃; storage temperature: -55°C~+70°℃4

3)Waterproof: rainfall intensity >2mm/min, 3h no leakage, 5h no drip-

4) Resistance to moisture and heat: ≤ 2 levels-

5) Load resistance: can withstand 100mm of light snow

6)Salt spray resistance: No discoloration, powdering, or cracking after 150 hours. it can resist the impact of salt spray corrosion environmental conditions in coastal areas.

7) Land requirements: It can be used on any land except hard rock, desert, soft soil with water content of more than 21%, Site slope < 3%.

8) Heat preservation and insulation: The heat preservation and heat insulation of the tent are achieved- through the outer tent material, the heat preservation inner 4 tent, and the air layer between the two, and then the additional heater and air conditioning+

9) Maximum pressure: ≥ 0.6 MPa

10). Reliability: One-time inflation can maintain working pressure for > 90 days, with a service life of no less than 5 years-

Maintain ability: Base-level maintenance ≤ 0.5h.

Supportability

1) Equipped with professional maintenance tools.

2) All kinds of interfaces can be reserved-

Physical and mechanical properties of gas rib: Penetration resistance: ≥1000N.